WhatsApp
SAMA NOIR
Order
Resin table · Made to order in Dubai · From AED 7,500

A resin table, and the questions to ask before you order one.

Resin tables in Dubai are offered at every price, and in photographs most of them look alike. The difference shows a year later, in the sun, in the cold air of the air conditioning, at the edge where the wood meets the pour. These are the questions we would ask any maker before paying a deposit — ourselves included.

Rivière: two walnut slabs divided by a river of clear resin that glows after dark The same Rivière table in daylight, walnut and clear resin
Why the price varies

Two tables can look the same and not be the same.

A resin table is wood, resin and hours. The wood can be dried properly or not. The resin can be a system made for the depth of the pour, or one made for a thin coat and poured too thick. The hours can go into sanding through the grades until the surface is a mirror, or stop at the first coat of gloss.

None of this is visible in a listing photograph. All of it is visible in the second summer. That is why the questions below matter more than the picture, and why a quote that is much lower than the others deserves a slower look rather than a faster yes.

We make one table at a time, in an edition of twenty-five per design, in our Dubai atelier. We are not the right maker for a dozen identical tables by next week — and we say so before anyone pays.

Before you pay a deposit

Six questions for any maker.

Ask them of us as well. A maker who is sure of the work answers before the order, not after it.

1. Can I see what will be built before it is made?

A photograph of someone else's table is not a drawing of yours. Ask for the composition at full size, with the dimensions and the price written next to it. Ours is drawn and agreed with you before the first cut or the first hole, and the final price is confirmed in writing with the drawing.

2. How is the resin poured, and why that way?

Resin is sold for a stated pour depth. A thick river poured with a resin meant for thin coats can overheat as it cures, and the faults appear later. Ask which approach the maker uses and why. On our pieces it depends on the design: Nebula is held in a single slow pour of black resin; Océan is built up in six layers to draw sand, shallows and surf.

3. What will the sun do to it?

Clear resin and strong light are an old argument, and in the Gulf the light is strong. Ask the maker directly what changes to expect over time near a window, and where in the room the table should stand. Put the same question to us — it belongs before the order.

4. Was the wood ready?

Wood that still holds moisture keeps moving after the resin has set, and an air-conditioned room in Dubai is dry. Ask how the slabs were dried and how long they rested before the pour. On Rivière the wood is walnut, two slabs either side of the river.

5. How is it finished?

Gloss can be sprayed on or worked in. Ask how many grades of abrasive the surface sees. Ours goes through ten grades and two polishing compounds until the black reads as a mirror, and every piece runs for a full night in the atelier before it leaves.

6. Who brings it, and what happens if it is wrong?

A finished table is heavy and its edges are its weakest point in transit. Ask who delivers and who installs. Inside the UAE our delivery and installation are included. Because every table is made to order it cannot be returned — which is exactly why question one comes first.

Océan: resin poured in six layers to show sand, shallows and white surf
What we make

Resin that does something after dark

Most resin tables are a river of colour between two slabs. Ours start there and carry light: optical fibre threaded point by point before the pour, so the surface stays quiet by day and opens in the evening. On Nebula, seven hundred stars sit under black resin, and thirty-six touch zones answer to a glass or a palm. More on how that works on the fibre-optic table page.

Nebula
Black resin · 700 stars · from AED 11,000
Rivière
Walnut and a river of clear resin · from AED 9,000
Océan
Six poured layers · from AED 8,500
Tawla
Backgammon in walnut, brass, resin · from AED 7,500
Nebula size
800 × 800 × 400 mm
Bespoke size
Up to 3.6 m
FromAED 7,500
The work

One hundred and twenty hours, by hand.

Each piece takes about one hundred and twenty hours: drawn, drilled, threaded, poured, polished through ten grades, then tuned and run for a full night before it leaves the atelier. The work takes from four weeks.

A size, an emblem or a line of calligraphy can be drawn into the table; see the custom table page. We deliver and install across the Gulf.

  • Edition25 numbered pieces per design
  • DeliveryUAE · KSA · Qatar · Kuwait · Bahrain · Oman
  • UAE deliveryIncluded, with installation
  • Lead timeFrom 4 weeks
  • ReturnsMade to order, not returnable
Often asked

Is a resin table the same as an epoxy table?

In furniture the two names are used for the same thing. Epoxy is the chemistry most table resins are based on; "resin table" is simply the wider word.

What does a resin table cost at SAMA NOIR?

From AED 7,500 for Tawla, AED 8,500 for Océan, AED 9,000 for Rivière and AED 11,000 for Nebula. A larger size or a personal design changes the figure, and the final price is confirmed in writing with the drawing.

How long does it take?

From four weeks. Each piece takes about one hundred and twenty hours of hand work.

Do you deliver outside the UAE?

Yes — to Saudi Arabia, Qatar, Kuwait, Bahrain and Oman, as well as the Emirates. Delivery and installation inside the UAE are included.

Made to order

Ask us the six questions.

Tell us which table, the room and the size — we will answer, and send the details, a drawing proposal, the price and the delivery time.